Soundmatters SLIMstage Manual - Manual (Page 9)

16 17
English
8. Problem: TMP or PT indicates in display and units cuts in/out.
Solution:
a. Overheat Protection Circuitry is working...turn down the volume.
9. Problem: Not enough volume
Solutions:
a. If available, increase the output on the source you are using.
b. Increase the sensitivity of the input, see Sensitivity Adjustment in Advanced Setup section.
10. Problem: Connected from Cable box but there is no sound
Solutions:
a. Unfortunately some cable boxes have digital out or even analog audio (red/white RCA)
audio connections that are dummies (not internally connected in the box). Check with your
cable provider to confirm the output capabilities of your box.
b. If using the digital output of your cable box, you may find that it only works when you are
on an HDTV channel, to access the audio for other channels you will also need to connect
to the analog audio output and switch to the correct input on the SLIMstage.
11. Problem: Optical cable won’t fit
Solutions:
a. Makes sure clear protective covers are removed from cable ends
b. Some aftermarket cables have overly large connector “jackets” and may not be able to be
accommodated.
12. Problem: I can’t access the SETUP menu
Solution:
a. SETUP access is locked. Sequentially press SETUP, , EXIT on the remote.
8. Specifications
SLIMstage 5.1 Surround Sound Console
• Surround Algorithms: Euphony™HD decodes Analog, PCM, Dolby Digital 2.0/5.1,
DTS Digital Surround, DTS 96/24
• Decoding 5.1 channel: Dolby Digital, DTS Digital Surround, DTS 96/24
• Decoding 2.0 channel: Dolby Digital, PCM
• 2-channel to 5-channel conversion: Euphony™HD
• Power: Class-D Amplifiers (RMS at < 0.8%THD)
SLIMstage 30 – Satellites 80W, Woofers 60W
SLIMstage 40 – Satellites 80W, Woofers 90W
SLIMstage 50 – Satellites 80W, Woofers 130W
• Maximum SPL@1m:
SLIMstage 30 – 103dB
SLIMstage 40 – 106dB
SLIMstage 50 – 109dB
• Main Speakers:
SLIMstage 30 – 4 each 50x50mm with patented LMD Neo-sandwich magnets
SLIMstage 40 – 4 each 50x50mm with patented LMD Neo-sandwich magnets
SLIMstage 50 – 4 each 50x50mm with patented LMD Neo-sandwich magnets
• Woofer Arrays:
SLIMstage 30 – 2 woofer arrays*
SLIMstage 40 – 3 woofer arrays*
SLIMstage 50 – 4 woofer arrays*
* Each array includes one Active High-Energy 3˝ patented LMD Neo-sandwich magnet woofer
plus two 3” bass radiators
• Power Supply: Digital, 95–265Vac, 50/60Hz, 36V
• Inputs (6)
Analog 1 –stereo 1/8” (3.5mm)
Analog 2 – stereo 1/8” (3.5mm) Available 20dB attenuation for speaker level in
Analog 3 – stereo 1/8” (3.5mm) Front Panel, with priority selection
Digital 1 – SP/DIF coax
Digital 2 – Optical / TosLink
Digital 3 – Optical / TosLink
• Outputs (3)
Analog: Subwoofer out – stereo 1/8” (3.5mm)
Analog: Headphone (Euphony Virtual Surround) –stereo 1/8” (3.5mm)
Rear Channel Outputs
• Accessories
IR remote control
Power supply with cables
EZ-tilt™ leveling feet with height insert
Wall-Mount Bracket with mounting hardware
1 each – 3m optical cable
1 each – 3m 1/8˝ mini phone jack cable
1 each – 3m 1/8˝ mini phone jack to male stereo RCA cable
1 each – 3m digital coax RCA cable
• Controls
Master, Headphone Volume (IR and front panel)
Subwoofer level (IR only)
Source select, mute (IR and front panel)
Surround/stereo (IR only)
• Modes: On, Mute, Off/Standby
• Off/Standby Power: 2W or less
• Weight:
SLIMstage 30 – 16.5 lbs (7.5 kg)
SLIMstage 40 – 19 lbs (8.5 kg)
SLIMstage 50 – 21 lbs (9.5 kg)
• Dimensions:
SLIMstage 30 (WxHxD) – 31.1” x 3.5” x 3.7” (790 x 88 x 93mm)
SLIMstage 40 (WxHxD) – 39” x 3.5” x 3.7” (990 x 88 x 93mm)
SLIMstage 50 (WxHxD) – 47.5” x 3.5” x 3.7” (1206 x 88 x 93mm)
Height with EZ-tilt leveling feet, any model (H) – 4.4” (112mm)
Height with feet+height insert, any model (H) – 5.2” (132mm)
Depth with wall-mount bracket, any model (D) – 5” (127mm)
soundmatters® believes in a policy of continuous product improvement,
therefore specifications are subject to change without prior notice.
9. Warranty/Service
There are two things you must do to ensure trouble free service in the event you need warranty
repairs.
1. Keep your original sales receipt in a safe place. A copy of the receipt will be required to obtain
warranty service.
2. Be sure your retail dealer has written the date, the model number, and the serial number (if
applicable) of the Product on the receipt. To give yourself an extra measure of protection,
make a separate record of the purchase information and keep it in a safe place. In the event
you misplace the sales receipt, your dealer may be able to provide a copy.
Take a moment now to read the terms of your warranty.
when shipping a product in for service:
• Email or call soundmatters for the proper ship-to address for servicing and an RMA (return
merchandise copy of your original sales receipt that has the date, the Product model number
and serial number (if applicable) written on it. You must place your RMA number on the
shipping label of any unit returned to soundmatters for service.
(Warranty/Service continues next page)