Cabletron Systems MicroMMAC 24T MICROMMAC- - Manual (Page 101)

TROUBLESHOOTING
5-5
5.2.3 Unsaved Initialization Messages
Unsaved intialization messages appear on the LCD as the event occurs, but
are not saved in a buffer for future recall. Table 5-4 lists unsaved failure or
error messages (If Failure or Error Messages appear, call your Cabletron
Technical Support representative.), and Table 5-5 lists normal unsaved
initialization messages.
Stack x Port xx
Removed
Indicates that a station has been removed from the
ring as a result of the beacon recovery process
Ring Port xx
wrapped Indicates a TPIM RI or RO has Autowrapped.
Eagle
Reinserting
Indicates that the Eagle chip set is automatically
being reinserted.
Fault Recovery
Oscillation Indicates that the network has been in and out of a
beaconing state several times.
Table 5-4. Unsaved Failure or Error Messages
Messages
• 82C54 Failure • Eagle Failure
• NVRAM Failure • LDRAM Failure
• Bit Swap Failure • Modem SCC Error
• Console SCC Error • SDRAM Failure
• Ctrl. Reg. Err.
Table 5-3. Alarm Messages (Cont.)
Displayed
Messages
Significance