Cabletron Systems MicroMMAC 24T MICROMMAC- - Manual (Page 77)

LOCAL MANAGEMENT
4-23
4.3.6 The DEVICE STATISTICS Screen
The DEVICE STATISTICS screen (Figure 4-9) displays ring information,
isolating errors, and non-isolating errors.
Figure 4-9. DEVICE STATISTICS Screen
The following sections discuss the fields on the DEVICE STATISTICS
screen and provide instructions for using them.
DEVICE STATISTICS
The DEVICE STATISTICS counter mode field at the top of the screen
(Figure 4-9 shows an sample screen in the TOTAL counter mode) displays
the method used for compiling device statistics. The method is selected
from the corresponding counter mode field located at the bottom of the
screen.
The MicroMMAC-T compiles and displays statistics from three separate
counter modes:
• ACCUMULATE: This mode lets you initiate a new statistic count for
a specified time period (procedure described below).
• DELTA: This mode automatically displays statistics describing
network performance since the last screen refresh (3 to10 seconds).
uMMAC-T Local Management Flash Image Version: 01.00.01
DEVICE STATISTICS (TOTAL)
RING INFORMATION
Frames Received: 4572 Active Monitor Addr: 00-00-B8-28-08-54
KBytes Received: 10157 Ring Status: Normal
Errors Received: 0 Ring Number: 0
Beacon States: 0 Stations on Ring: 1
Ring Purges: 2 Ports Enabled: 0
Active Monitor Changes: 1 Ring Speed (Mb/s): 4
ISOLATING ERRORS NON-ISOLATING ERRORS
Line Errors: 0 Lost Frame Errors: 0
Burst Errors: 0 Frame Copied Errors: 0
AC Errors: 0 Rcvr Congestion Errors: 0
Abort Transmit Errors: 0 Token Errors: 0
Internal Errors: 0 Frequency Errors: 0
[ TOTAL ] [ REFRESH 3sec ] RETURN