SUUNTO Vyper - Manual (Page 39)

5.6. DIVE mode settings
Suunto Vyper has several user-definable functions, as well as depth and time-related
alarms that you can set according to your personal preferences. The DIVE mode
settings are dependent on the dive submode chosen (AIR, NITROX, GAUGE), so that,
for example, settings are only available in the submode.
The Set Modes [3 SET] include dive configuration and setup options that have to be
set before the dive. The Set Modes are divided into three submodes for setting the
dive-related parameters, time related parameters and your personal preferences.
Time related parameters [2 SET TIME] and personal preferences [3 SET PREF] are
introduced in Section 4.1. SET MODES [3 SET].
To enter the Dive Parameter Setting Mode, select MODE- 3 SET- 1 SET DIVE. The
Dive Parameter Setting mode [1 SET DIVE] has two to four options depending on the
dive computer mode. In Gauge mode there are two options, in Air mode three options,
and in Nitrox mode four options.
The figure below shows how to enter the DIVE mode settings menu.
NOTE
Some settings cannot be changed until five (5) minutes has
elapsed after the dive.
39