SUUNTO Vyper - Manual (Page 73)

6.3. Diving in the GAUGE mode
If set to Gauge mode, the dive computer can be used for diving with technical diving
mixed gases. If you are trained for technical diving and you plan to use Gauge mode
on a regular basis, it may be preferable to set the instrument permanently to its Gauge
mode. If set to Gauge mode, the text GAUGE is shown after activation. In the Gauge
mode the present depth, maximum depth, dive time, remaining air time and ascent
rate indicator are displayed during the dive. In addition, temperature and current time
are shown in the alternative display.
Figure 6.15. The Gauge mode. The present depth, maximum depth, dive time,
remaining air time and ascent rate indicator are displayed during the dive.
This mode can also be used for other purposes like snorkeling, free diving, depth
measurements, and so on.
NOTE
The mode does not provide decompression information.
73