SUUNTO Vyper - Manual (Page 92)

7.6.2. Dive Planning Simulator [2 SIMPLAN]
The Dive Planning Simulator mode shows you the present no-decompression limits.
In this mode, you are also able to add the desired surface interval increment to present
surface interval time, which allows you to plan your dives in advance.
This mode is also used to add the desired surface intervals for dive simulations. Add
the desired surface interval increment to present surface interval by pressing the arrow
down (TIME) and arrow up (PLAN) buttons.
To enter the Dive Planning Simulator mode select MODE- 2 SIMUL- 2 SIMPLAN.
Figure 7.13. Dive Planning Simulator mode [2 SIMPLAN]. Add desired surface interval
increment (to present shown surface interval) by pressing TIME and PLAN buttons.
This display is only shown for repetitive dives.
NOTE
This display is only shown for repetitive dives.
92