TC-Helicon VoiceLive Touch User Manual - Manual (Page 10)

2. Press and hold the desired Favorite location to store.
Displaying preset names
As long as you are not in an editing menu, you can scroll the current
preset or Favorite’s name by tapping the Slider once.
M
USICAL
C
ONTROL OF
H
ARMONY AND
H
ARD
T
UNE
The harmony and HardTune effects require musical information to
sound correct with your accompaniment. VoiceLive Touch dynamically
detects whether a single device (guitar, MIDI or MP3 player) is connected
and temporarily assigns it as the musical control device.
Using Guitar, MIDI or Aux In to control harmony
Connect one device to the respective input jack on the rear panel. Select
any preset that has the Harmony and/or FX button LED lit such as
preset #3. Sing while you play guitar, MIDI keyboard or MP3 player.
These inputs are interpreted to produce moving harmony intervals that
correlate to the changing chords in your music. In presets with ““N
Nootteess””
in the title, the Harmony voices are controllable only by MIDI; your exact
keyboard notes determine the harmony pitches.
Using key and scale to control Harmony and HardTune without an
instrument
You can enter a key and scale when you a) know the key of the song
you are singing and b) have a pitch reference to sing along with such as
an instrument or mixed music. Choose a preset such as #3: Tuned
Up+Down to hear the effects.
To enter the Harmony key and scale of your song:
1.
Hold the Harmony button to enter its edit menu.
2. Press the arrow buttons until you locate the Key: menu.
3. Slide along the Slider to choose the key.
4. Tap the right arrow to enter the Scale: menu.
5. Slide to choose a Major scale e.g. M1, M2, M3 or a minor scale
e.g. m1, m2, m3.Try each scale for best fit with your music.
Now, sing the song with your accompaniment. By default, the key and
scale you set will remain in effect for all harmony presets. If you prefer
to save different keys for presets, turn the Key/Scale Gbl parameter in
the Setup menu to Off.
Note regarding Custom scales: Scale customization is not possible in
Touch. Some presets ported from VoiceLive 2, e.g. those with “Drone” in
the name, will show Cu for scale. This indicates the scale is custom,
though it cannot be edited further in VoiceLive Touch.
B ASIC L OOPING
To make a basic loop:
1. Load or edit a preset you want as your first layer effect.
2. Press the red Record button where you want your loop
to start from and sing a short phrase.
3. Press the Record button again to end recording and begin loop
playback.
You should now hear your repeating phrase.You can press the green Play
button to stop playback.
Basic Operations
11