Basic operations – TC-Helicon VoiceLive Touch User Manual User Manual

Page 14

Advertising
background image

F

INDING

P

RESETS WITH THE

P

RESET

W

IZARD

1.

In Home mode, press and hold the Slider

2.

Drag the slider to choose a preset category

3.

Tap the Slider

4.

Swipe the slider to listen to presets within the choosen category

5.

Double tap the slider to select the preset and return Home.

The Wizard categories are listed below:
Harmony

HardTune Megaphone Character

Extreme

Modulation Tap

Double

Choir

Simple

Notes

No Harmony

S

ETUP

: P

HANTOM

P

OWER

, M

ONO

O

UTPUT

,

MIDI C

HANNEL AND MORE

Standard settings are located in the Setup menu. The Setup

parameters make global changes (ones that don’t change when you
change presets). Edits made in the Setup menu are retained over
subsequent powered-on sessions.
1.

To enter the Setup Menu, hold the Mix button.

2.

To find Setup parameters, tap the arrow buttons.

3.

To make changes to a parameter value, swipe the Slider. Changes
are active immediately and stored until changed again.

4.

To view the name of a selected parameter and value while in
Setup menu, tap the Slider.

5.

To exit the Setup menu, double tap the Slider.

The Setup parameters are listed below:
1 Phantom - Turn this on to provide 48V phantom power if you are using
a condenser microphone.
2 Tone - Applies adaptive Shape EQ, compression, de-ess and gate functions.

Off

5 Normal No Gate

1 Normal

6 Less Bright NG

2 Less Bright

7 Warmth NG

3 Norm + Warmth

8 More Comp NG

4 More Comp

3 Pitch Cor Amt - Controls auto chromatic pitch correction. 50% is a
good starting setting.
4 Gtr FX Style - Combines guitar-dedicated reverb and μMod effects
into styles.

Off - No guitar effects
1 Thk+Hall - Thicken (detune) and medium hall reverb
2 Hall - Hall reverb only, no thicken
3 Thk + Room - thicken plus small room reverb
4 Room - Small room reverb only
5 Thk + Arena - Thicken plus long arena reverb
6 Arena - Arena reverb only

5 Output - Configures the outputs for stereo or mono.

Stereo - (default) Set when using the Left and Right 1/4”TRS jacks into
a stereo PA.

Basic Operations

15

Advertising