TechniSat TechniVision ISIO 55 - Manual (Page 13)

13
The SMS keyboard is operated using the numeric pad on both the alphabetic and the
QWERTY keyboard, and can be used at any time. The coloured buttons thus incorporate the
functions described above.
>
Press one of the numeric pad keys 0 - 9 and select the various letters, numbers,
characters and symbols.
The first letter of the respective row of characters is highlighted after first pressing a
numeric pad key.
> The highlight then moves one field to the right for every additional press of the same
numeric pad key.
Press as often as necessary to reach the desired character. This will be added to the
entered term after a short delay.
The various numeric pad keys are assigned to the following displayed letters, numbers,
characters and symbols.
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Once you have reached the field you want with the highlight, you can then begin
selecting the next character immediately since, in this case, the character is directly
added to the term.
If you wish to continue directly selecting a character from the same numeric pad
key, you can add the previously highlighted character to the term by pressing the
right arrow key.
If you are using a USB or wireless keyboard, for example the TechniSat ISIOControl
keyboard (part no. 0001/3850) or ISIOControl Keyboard II (part no. 0002/3850), you
can also use this keyboard to enter all the input using this keyboard. The TechniSat
ISIOControl keyboard is specially designed for the TV and also enables control of a
wide range of other operations.