TechniSat TechniVision ISIO 55 - Manual (Page 18)

Network configuration
> If you do not want to run the network configuration check, press the Info button.
> If you want to change the network settings, press the Option button and proceed as
described in sections 10.4.2 and 10.4.3 of the instruction manual, then confirm with the
green function key to accept the settings.
> After the network check has been successfully completed, press the OK button to
move on to the next step.
Channel search / ISIPRO nur DVB-S
> To download the available current channel list, use the up/down arrow keys to
highlight the ISIPRO - service list update line and start the process by pressing the
OK button OK.
After the service list update, an automatic channel search on all other configured
reception sources is then carried out via “All Channels”.
> If you want to run a channel search via satellite as well, or if the DVB-S reception signal
has not been configured, use the up/down arrow keys to highlight the All channels or
All unencrypted channels field, then start the channel search process by pressing the
OK button.
All Channels searches for free-to-air and encrypted channels, and All
unencrypted channels for just free-to-air channels.
18