TechniSat TechniVision ISIO 55 User Manual
Page 16
Display mode
>
Use the up/down arrow keys to select your preferred display mode and confirm by
pressing the OK button.
The values for the selected display mode can be adjusted as you want after the
AutoInstall, as described in section 10.1 in the instruction manual.
When selecting the natural and intensive display modes, note the message(s) that
appear as well as sections 3.3.3, 7.9 and 10.1 in the instruction manual and confirm by
pressing the OK button.
Selecting reception signals
>
Use the up/down arrow keys to select the reception signal whose availability you
want to switch on or off:
DVB-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for digital satellite channels;
DVB-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for digital cable channels;
DVB-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for digital terrestrial channels;
Analog CT . . . . . . . . . . . . . . . . . . for analogue terrestrial and cable channels.
>
Press the OK button to open the selection window, highlightthe setting you want with
the up/down arrow keys and close the window by pressing the OK button again.
>
To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK button.
16