TechniSat TechniVision ISIO 55 - Manual (Page 4)

4
2 Please read this first
Dear customer,
This quick start manual only describes the most important connection options and basic
operation steps to enable you to start using the TechniPlus ISIO quickly. It does not in any
way replace the full instruction manual for the TV.
There are many additional functions described in the full instruction manual that are not
covered in this quick start manual. There is also a great deal of additional information about
individual functions and settings in the full instruction manual, which provides a more detailed
explanation of the available options and the purpose of the settings and functions.
Please also ensure that you comply with the notes on safety provided under section 3 of
the instruction manual on safety, appropriate use, operation, power consumption in standby
mode and during operation as well as on transporting and cleaning the television. You will
also find information provided in this section about disposal of the packaging and of the
television. The manufacturer's declaration is also provided in this section.
2.1 Inserting/changing the batteries in the remote control
> Open the cover on the battery compartment at the rear of the remote control by pushing
it in the direction of the arrow and then lifting it off.
> Insert the supplied batteries, ensuring that the poles are the right way around (indicator
visible in battery compartment), then close the battery compartment again.
2.2 Setting the remote control code
> Hold down the remote control code button to switch over the remote control option
and press the OK button as often as necessary until the LED for the desired remote
control option (TV, SAT1 or SAT2) flashes briefly.
2.3 Legal notices
Subject to change for amendments and printing errors. Version 05/14 You can find the
current version of the manual in the download area of the TechniSat home page.
TechniVision ISIO 42, TechniVision ISIO 47, TechniVision ISIO 55 and TechniSat
are registered trademarks of TechniSat Digital GmbH, Postfach 560, 54541 Daun,
Germany, www.technisat.de.
2.4 Servicing notes
Warning: if you encounter a problem with this equipment, please contact our Technical
Hotline initially. You can reach this on Mon - Fri 8am to 8pm on +49 (0) 3925 9220
1800.
If the device needs to be sent to us for any reason, please send it to TechniSat
Teledigital AG, Service-Center, Nordstr.
The following references (a b c) refer to the connection example on page 5.