TeeJet 844-R Speed Compensated Application Control - Manual (Page 23)

98-05047 23
R0
How To Use
To activate the simulated speed, set a value other than zero in the Simulated
Ground Speed step as indicated above. Upon exiting the programming mode,
the simulated ground speed is in effect, and appears in the speed area of the
display (lower left quadrant). The tractor symbol flashes when a simulated speed
is in effect.
C
OMMUNICATIONS
This step lets you select what type of communication to use (if any).
The choices available are:
“no com” (no communications)
“log” (Downloading to a PC on the
go capability)
“gps” (Global Positioning System /
Variable Rate communication
capability)
”Prt” (printing),
Use the
+
and keys to select
the type of communication you are
using.
Press the
P
RO
key to advance to the next step.
C o m
N o
Once the sprayer begins moving and the 844-R receives actual speed pulses, the
simulated speed feature is deactivated. If you are using a Radar Speed Sensor,
disconnect the Radar connection from the main console. Because of the
sensitivity of this speed sensor, any movement can disable simulated speed.