TeeJet LH 3000 - Manual (Page 16)

LH 3000 OPERATING MANUAL
16 LH A GRO
METRES
Travelled distance in metres since last zero setting. Maximum display 99999
metres after which the counter restarts from zero.
The meter counters is zeroed by pressing the key simultaneously by the
key.
REMAINING AREA
Remaining area to work.
The function presupposes encoding of area before start. To be done as follows:
EXAMPLE:
The field is 10.40 ha.
1. Press for 3 seconds until the figure keys are lit.
2. Encode 1040 on the keyboard.
3. Press . The figure keys disappear and the monitor is operational.
The remaining area may be displayed with a minus in front. This appears if the
worked area is bigger than the originally encoded area. (Or if a zero setting has
been forgotten).
AREA RECORDING
Two area meters are available: a trip counter and a total counter:
TRIP COUNTER: Press and area since the last zero setting is displayed
with two decimals.
TOTAL COUNTER: Keep the key pressed and the total area since last zero
setting will be displayed.
The area recording can be stored for later print of job cards. See “JOBNO” and
“MEMO”.
Zeroing of area counters when no print of job cards is required: