Canon Z5000 - Manual (Page 149)

6
6-7 Troubleshooting the ColorPASS
In Network Setup, when you configure the IPX (Novell) connection, the ColorPASS
queries the network for Novell file servers and trees, and attaches to them temporarily.
If a guest login is enabled, it will be used. If not, you’ll be prompted to log in from the
Command WorkStation.
Add File Server
(Network Setup> Service
Setup>PServer Setup>
Bindery Setup) All connections used.
Remove server? You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup> Service
Setup> PServer Setup>
Bindery Setup) No NetWare print
server found. No print server was found when ColorPASS queried the
file server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle ColorPASS print
jobs (see page 5-7).
Any Bindery Setup screen Novell error code, followed by
a message. Novell NetWare has reported an error. The Command
WorkStation reports the error number and displays a brief
message.
For the most common errors (listed in the following table),
a screen is displayed that enables you to retry the action
that evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.
After this Setup screen: This message: Means: