Canon Z5000 - Manual (Page 49)

3
3-13 Network Setup options
Enable Source Routing
Yes/No [No]
Select Yes if your network supports source routing.
Source Routing
Request All Routes
Yes/No [Yes]
This option appears only if you enabled Source Routing. Select Yes if you want the
Request packet to travel to its destination by all routes.
Source Routing
Respond All Routes
Yes/No [Yes]
This option appears only if you answered No to the previous option. Select Yes if you
want the Response packet to return by all routes to the originating computer.
Protocol Setup options
AppleTalk Zone
List of zones
The ColorPASS searches the network for AppleTalk zones in your network segment.
Scroll through the list to select the AppleTalk zone in which you want the ColorPASS
to appear. If your segment has only one zone, the ColorPASS is assigned to that zone
automatically.
To configure the ColorPASS, choose each protocol and enter the settings for that
protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication
simultaneously.
Network Setup
Protocol Setup
AppleTalk Setup
Enable AppleTalk
Yes/No [Yes]
Select Yes if you have an AppleTalk network connected to the ColorPASS. This setting
enables the ColorPASS to communicate over AppleTalk networks.
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup