TeeJet FieldPilot Install Miller 22xx T T-SS T-ET HT - Manual (Page 14)

12
www.teejet.com
FieldPilot ®
5. install the tank hose
Locate the tank connection at the steering orbital. Disconnect the tank hose and install run tee (N) . Reconnect
original hose to the run of the tee. Then connect hose (K) from the branch of the run tee to the tank port of the
FieldPilot valve. The hose will route down from FieldPilot valve and underneath the cab to the branch of the run
tee at steering orbital.
Figure 1-8: Install The Tank Hose
K
n
K
K