Fieldpilot, Magnets, Installation of engage/disengage switch – TeeJet FieldPilot Install Miller 22xx T T-SS T-ET HT User Manual
Page 17
Advertising
15
FieldPilot
®
98-05232 R0
Magnets
9. installation oF enGaGe/disenGaGe switch
Connect item
(A)
to the connector on the SCM harness labeled Remote Engage/Disengage. Install the push
button in a location that is easily accessible during operation of the machine. This switch
(A)
is not required if the
optional foot switch 32-04020 is used.
Figure 1-12: Engage/Disengage Switch
Advertising