Clarion DXZ955MC - Manual (Page 30)

30
DXZ955MC
280-8036-00
English
Sound Adjustment
●“HPF”
• The adjustment range of “HIGH” is 630Hz
to 20 kHz. (The factory default setting is
“2kHz”.)
• The adjustment range of “MID” is
THROUGH, 25Hz to 10 kHz. (The factory
default setting is “THROUGH”.)
• The adjustment range of “SUB-W” (in the
case of 3WAY) or “REAR” (in the case of
2WAY) is THROUGH, 16Hz to 250 Hz.
(The factory default setting is
“THROUGH”.)
●“LPF SLOPE” and “HPF SLOPE”
• The adjustment range is -6dB/OCT,
-12dB/OCT, -18dB/OCT. (The factory
default setting is “-12dB/OCT”.)
●“PHASE”
• The adjustment range is NORMAL/
REVERSE. (The factory default setting is
“NORMAL”.)
7. Repeat steps 4 to 6 to adjust each setting.
8. Touch [RTN].
∗ You can store the settings. For details, see
“Storing and recalling the SETTING
adjustments” (page 31).
SETTING–TIME ALIGN
The distance from the listener up to each
speaker can be entered in 2.3 cm steps, and the
time that the sound reaches the listener from
each speaker can be adjusted. (Time alignment)
• The factory default setting is “0.0cm”.
1. Press the [SOUND] button.
2. Touch [SETTING].
3. Touch [TIME ALIGN].
TIME ALIGN
RTN
HIGH L SP 0.0cm
4. Touch on the left of the display to
select the desired speaker.
Each touch of
switches the
adjustment items as follows:
HIGH L SP
➜ HIGH R SP ➜ MID L SP ➜
MID R SP ➜ SUB-W L SP* 1 ➜ SUB-W R
SP* 1 ➜ REAR L SP* 2 ➜ REAR R SP* 2 ➜
HIGH L SP...
*
1 This is displayed when the “SPEAKER
SELECT” is set to “3WAY”.
* 2 This is displayed when the “SPEAKER
SELECT” is set to “2WAY”.
5. Touch on the right of the display to
adjust the setting.
∗ The adjustment range is 0cm to 501.4cm
in 2.3 cm steps.
6. Repeat steps 4 and 5 to adjust each item.
7. Touch [RTN].
∗ You can store the settings. For details, see
“Storing and recalling the SETTING
adjustments” (page 31).
SETTING–SP GAIN
This function allows you to adjust the speaker
output level. Adjust so that the volumes that are
output from each speaker are well-balanced.
(Speaker gain)
1. Press the [SOUND] button.
2. Touch [SETTING].
3. Touch [SP GAIN].
SP GAIN MODE
RTN
HIGH L SP 0dB
4 Touch on the left of the display to
select the desired speaker.
∗ Each touch of
switches the
adjustment items as follows:
HIGH L SP ➜ HIGH R SP ➜ MID L SP ➜
MID R SP ➜ SUB-W L SP* 1 ➜ SUB-W R
SP* 1 ➜ REAR L SP* 2 ➜ REAR R SP* 2 ➜
HIGH L SP...
*
1 This is displayed when the “SPEAKER
SELECT” is set to “3WAY”.
* 2 This is displayed when the “SPEAKER
SELECT” is set to “2WAY”.
5. Touch on the right of the display to
adjust the setting.
∗ The adjustment range is -20dB to 0dB.
6. Repeat steps 4 and 5 to adjust each item.
7. Touch [RTN].
∗ You can store the settings. For details, see
“Storing and recalling the SETTING
adjustments” (page 31).
+DXZ955MC_01-27-Eng.p65 1/8/05, 2:53 PM 30