Clarion DXZ955MC - Manual (Page 33)

280-8036-00
English
DXZ955MC
33
Sound Adjustment
Adjusting/storing VSE (user
memory)
Adjustment items
● DIFFUSE
Adjusts the deviation in diffused sound
pressure.
● CAR WIDTH
Adjusts the deviation in sound pressure along
the width of the car.
● CAR LENGTH
Adjusts the deviation in sound pressure along
the length of the car.
1. Press the [SOUND] button.
2. Touch [VSE].
P.EQ FILTER
RTN
OFF OFF OFF 0 0
SOUND
ADF VSE
SW
VOLUME
BALANCE
1 2
3. Touch [ON/OFF] to turn ON.
The VSE effect is toggled ON/OFF.
VSE MODE
RTN
FLAT
OFF
ON/OFF PRESET
P 1
PRESET
4. Touch on the right of the display and
select one of the VSE basic menus.
5. Press the [ADJ] button.
6. Touch on the left of the display and
select [DIFFUSE], [CAR WIDTH], or [CAR
LENGTH].
VSE EDIT
RTN
DIFFUSE 5
OFF
ON/OFF
7. Touch on the right of the display to
adjust the item.
Each touch switches the value from 1 to 10.
8. Repeat steps 6 and 7 to adjust the desired
item.
9. When you have finished adjusting each item,
touch [RTN].
Notes:
• The screen displayed in step 3 appears, with the
title being accompanied by " ✓" mark.
Operation so far completes VSE adjustment. To
continue to store the adjustment value to the VSE
user menu, perform the following.
10. Touch [PRESET] to display the VSE menu
list.
11. Touch and hold [USER] for 2 seconds or
longer.
You will hear a long beep, and the values
you adjusted up to step 9 are stored to the
VSE menu.
If you hear a short beep, the adjustment
values up to step 9 are discarded. Adjust
these values again as required.
12. Press the [SOUND] button to return to the
original mode.
Selecting the P.EQ menu
P.EQ (Parametric Equalizer) allows you to
compensate the entire frequency level range in
detail by smooth curve using frequency
compensation matched to the type of your car.
The P.EQ menu can be adjusted only when the
“SPEAKER SELECT” is set to “NORMAL” (cf.
page 14) and “EQ SELECT” is set to “P.EQ” (cf.
page 43).
• The factory default setting for P.EQ is “OFF”
and for the P.EQ basic menu is “SEDAN-1”.
■ P.EQ basic menu
6 types of P.EQ basic menu are pre-stored to
this function matched to the type of your car and
the speaker mounting position. Select the basic
menu to suit you car.
1. Press the [SOUND] button.
2. Touch [P.EQ].
SETTING
P.EQ X-OVER TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
OFF
3. Touch [ON/OFF].
The P.EQ effect is toggled ON/OFF.
P.EQ MODE
RTN
SEDAN-1
OFF
ON/OFF PRESET
P 1
PRESET
4. Touch on the right of the display and
select one of the P.EQ menus.
+DXZ955MC_01-27-Eng.p65 05.1.17, 5:16 PM 33