Clarion DXZ955MC - Manual (Page 31)

280-8036-00
English
DXZ955MC
31
Sound Adjustment
SETTING–ALL SEAT
The setting of “TIME ALIGN” and “SP GAIN”
temporarily returns to the factory default setting.
When the setting that is adjusted for the driver's
seat returns to the factory default setting, a
sound suitable for all seats is provided.
1. Press the [SOUND] button.
2. Touch [SETTING].
3. Touch [ALL SEAT].
SETTING
P.EQ X-OVER TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
ON ALL
“ALL” appears on the display and the setting
of “TIME ALIGN” and “SP GAIN” is set to the
factory default setting.
■ To disable ALL SEAT setting
1. Touch [ALL SEAT] again.
Storing and recalling the
SETTING adjustments
If your speaker system is “3 WAY” or “2 WAY”,
you can store and recall up to three adjustments
you have made to “P.EQ”, “X-OVER”, “TIME
ALIGN”, “SP GAIN”.
1. Adjust one of the items in the SETTING.
2. Display the [SETTING] screen.
∗ To display this screen from the beginning,
press the [SOUND] button, then touch
[SETTING].
3. Touch [PRESET].
SETTING
P.EQ X-OVER
TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
OFF
4. Touch one of [SAVE 1], [SAVE 2], and
[SAVE 3].
SETTING PRESET
LOAD
1
LOAD
2
LOAD
3
SAVE
1
SAVE
2
SAVE
3
INITIAL RTN
∗ If you touch [LOAD] or [INITIAL] before
touching [SAVE], the adjustments you
have made will not be stored.
■ To initialize the adjustments
You can initialize the adjustments for SETTING
items.
1. Touch [SETTING].
2. Touch [INITIAL].
All the adjustments are initialized.
■ To recall the adjustments for
SETTING items
You can recall the stored adjustments for
SETTING items.
1. Press the [SOUND] button.
2. Touch [SETTING].
3. Touch [PRESET].
SETTING
P.EQ X-OVER TIME
ALIGN
SP
GAIN
ALL
SEAT
PRESET RTN
OFF
4. Touch one of [LOAD 1], [LOAD 2], and
[LOAD 3] to recall the stored adjustment.
Adjusting the sub-woofer/
center speaker
• “SW VOLUME” (sub-woofer) can be adjusted
only when the “SPEAKER SELECT” is set to
“3WAY”, “Dolby PL II” or “NORMAL” and
“SUB-WOOFER“ is set to “ON” (cf. page 43).
• “CTR VOLUME” (center speaker) can be
adjusted only when the “SPEAKER SELECT”
is set to “Dolby PL II” and “CENTER-SP” is
set to “ON” (cf. page 43).
• The factory default setting for SW VOLUME is
“0” and for CTR VOLUME is “0”.
1. Press the [SOUND] button.
2. Touch [SW VOLUME] or [CTR VOLUME].
SW VOLUME
RTN
0
∗ If you selected “Dolby PL II”, use [Е]/[О]
to go to the next page.
3. Touch on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
4. Press the [SOUND] button to return to the
original mode.
+DXZ955MC_01-27-Eng.p65 05.1.17, 5:16 PM 31