Clarion DXZ955MC - Manual (Page 37)

280-8036-00
English
DXZ955MC
37
Set the value to “0” to reproduce all center
sound from the center speaker.
Set the value to “7” to distribute all center sound
to left/right front speakers, just like a normal
stereo system.
* “CTR WIDTH” is displayed only when
“CENTER-SP” is set to “ON”.
1. Press the [SOUND] button.
2. Touch [ Е]/[О] to go to the next page.
3. Touch [Dolby PL II CONT].
• The items to set are “PANORAMA”,
“DIMENSION”, and “CTR WIDTH”.
4. Touch on the left of the display to
select the item.
Dolby PL CONT
RTN
PANORAMA NO
5. Touch on the right of the display to
adjust the values.
• For “PANORAMA”, select “YES” or “NO”.
• “DIMENSION” can be adjusted within the
range 0 to 6.
• “CTR WIDTH” can be adjusted within the
range 0 to 7.
6. Press the [SOUND] button to return to the
original mode.
Adjusting the rear speaker
delay time
Delay time
The time necessary for sound to travel from
speakers to a listener differs depending on the
speaker location or the car size. By adjusting the
delay time of each speaker, you can hear the
sound from the front speakers and the other
speakers simultaneously.
• This item can be adjusted only when
“SPEAKER SELECT” is set to “Dolby PL II”.
• The factory default setting is “0ms”.
1. Press the [SOUND] button.
2. Touch [ Е]/[О] to go to the next page.
3. Touch [SRD DELAY].
SRD DELAY
RTN
SRD SP 0ms
Sound Adjustment
4. Touching on the right of the display to
adjust the delay time.
• “SRD-SP” can be adjusted within the
range 0ms to 15ms.
5. Press the [SOUND] button to return to the
original mode.
+DXZ955MC_01-27-Eng.p65 1/8/05, 2:53 PM 37