Canon DR-5020 - Manual (Page 20)

19
1
(7)Count Only key (P.53)
Sets the scanner to the Count Only mode for just counting the number of
pages in the document.
When you press this key, it will light. If you load the document and press the
Start key in this state, the document will be fed and the scanner will count the
number of pages. (The document will not be scanned.) The document page
count is displayed on the counter display.
(8)New File key
Press this key to save scanned images to separate files.
When you press this key, it will light. When you scan the next document in this
state, the scanned image will be saved to a folder separate from the folder for
the previous document.
When Auto New File is set in the application, this key lights automatically when
each document stack has finished being scanned.
(9)Stop key
Press this key to stop scanning midway.
Also use this key to cancel the currently set mode and cancel an error
displayed on the counter display.
To reset the counter display to “0000” hold down this key for at least two
seconds.
(10)Start key
Press this key to start scanning when the feed mode is set to Semi-Auto.
1.3 Part Names