Canon DR-5020 - Manual (Page 41)

40
Chapter 3 Preparing Documents
◆ Remote mode
This mode is best suited to scanning only one document stack.
1
Make sure that all of the Semi-Auto, Auto and Manual lamps are
out.
If any of the lamps is lit, press the Feeding Option key until all lamps are
out.
Feeding Option key
Each press of the Feeding Option key changes the lamp indication cyclically as
follows:
OFF (Remote Mode)
→ [Semi-Auto] → [Auto] → [Manual] → and back to OFF
(Remote Mode)
2
Select the following settings on the operation panel.
This setup is not required if it has already been made in the application.
New File
Feeding Option
Count Only
Semi-Auto Auto Manual
A
Text/Picture
[Text]: This is lighting, when scanning
the text documents (including
mostly characters) with black
and white mode.
[Picture]: This is lighting, when scanning
the picture documents including
photographs with black and
white error diffusion mode.
If any applications are set with gray scale
mode or color mode for the image
selection, either of above will not be
lighting.
Simplex/Duplex
[Simplex]: Select this when scanning
only one side of the document.
[Duplex]: Select this when scanning
both sides of the document.
Brightness keys
Set the brightness when the document is
scanned.
To automatically adjust the brightness,
press A key to light A .
To manually adjust the brightness, press
or keys to move the indicator display
above the key and adjust the brightness.
For details on other setup parameters, see “3.3 Setting Scan Conditions.” (P.58)
MEMO
MEMO