Toa SV-200MA - Manual (Page 21)

21
9. BROADCAST OPERATION AT THE AMPLIFIER
9.1. Microphone Announcements (When Operated by Control Input)
For connection of the control input (CTRL 1 – 3), refer to p. 32.
Notes
• TOA's Paging Microphone PM-660D (for Input 1) is equipped with the talk key.
• When using a commonly-used microphone, the press-to-talk switch needs to be made.
9.2. Background Music Broadcast
Adjust the sound volume.
(Use the BGM input volume control located on the VM amplifier front panel.)
Make an announcement at the microphone.
Continuously press the microphone press-to-talk key.
(If the microphone is of lock lever type, set the lever to the ON position.)
Release the microphone press-to-talk key.
(If the microphone is of lock lever type, set the lever to the OFF position.)
Start up background music equipment (CD player or cassette deck)
Select the desired broadcast zone.
(Use the keys for ZONE 1 – 5 or the ALL key located on the VM amplifier front panel.)
Adjust the tone.
(Use the BGM treble/bass control located on the VM amplifier front panel.)