Toa SV-200MA - Manual (Page 22)

22
10. REMOTE MICROPHONE GENERAL-PURPOSE BROADCAST
10.1. Operation and Display Sections
The panel functions of the operation and display sections differ depending on the amplifier configuration (5
zones or 10 zones) and the use of the Recorded Message Announcement function. The figure shows an
example of the operation panel function for a 5-zone single amplifier configuration with the Voice
Announcement Board. (For samples of the operation panel functions for other amplifier configuration, see p.
14 "Remote Microphone Operation Panel Function.")
Notes
• Both the Busy indicator and the In-use indicator indicate the ready status for live microphone
announcements made after selecting the broadcast zone(s) with the All-zone, Zone, or Group selector key.
Their indications have nothing to do with the Recorded message broadcast.
• For priority levels of Remote Microphone live announcements and Recorded messages, see p. 26
"GENERAL-PURPOSE BROADCAST PRIORITY."
[Broadcast volume]
All announcements (including Recorded messages) from the Remote Microphone are broadcast at the
maximum volume level regardless of the settings of the master volume control and zone volume control. Also,
the amplifier performs relay control to permit the announcements to bypass external speaker attenuators.
Zone selector key (ZONE 1 – 5)
Zone indicator
Talk key (TALK)
Message selector key
(MESSAGE 1 – 5)
Message indicator
Busy indicator (BUSY)
Flashes orange or green when other connected sound source unit is in use.
Orange: The RM-200M cannot operate.
Green: The RM-200M can interrupt the busy unit.
In-use indicator (IN-USE)
Lights green when the RM-200M is in use. Microphone
Power indicator (POWER)
Failure indicator (FAULT)
Group 1&2 broadcast key
(GROUP 1, 2)
Group 1&2 indicator
All-zone broadcast key
(ALL-ZONE)
All-zone indicator
Remote microphone RM-200M