Toa TS-910 Series Installation - Manual (Page 20)

20
[Right side]
HEADPHONES MAIN SUB
POWER
ON
OFF
HEADPHONES MAIN SUB
11 12
13
14
11. Monitor volume control
Adjusts the output volume of the monitor speaker
and right-side headphone output.
12. Monitor selector switch (TS-902 only)
Selects either Base Language or Translation
Language for the source to be output to the
monitor speaker and headphone.
13. headphone jack
Connect headphones to this jack (mini-jack).
Connecting the headphone cuts off the output
from the monitor speaker. (Refer to the table
below.)
Model Output signal
TS-902 Base language or Translation language
Note: Switchable by the Monitor selector
switch (12).
TS-802 Base language
Note
A headphone jack is located on both the left and
right side panels.
14. Power switch
Press this switch to switch on the power.
To switch off the power, press this switch again.
[Left side]
13
15
16
15. DC inlet
Connect the dedicated AD-0910 AC Adapter to
this terminal.
16. headphone volume control
Adjusts the output volume of the left-side
headphone output.