Programming transmitters to the vehicle, Battery replacement – Cadillac 2011 DTS User Manual

Page 110

Advertising
background image

Black plate (6,1)

Cadillac DTS Owner Manual - 2011

Programming Transmitters to the
Vehicle

Only RKE transmitters programmed to the vehicle will
work. If a transmitter is lost or stolen, a replacement can
be purchased and programmed through your dealer.
When the replacement transmitter is programmed to
the vehicle, all remaining transmitters must also be
programmed. Any lost or stolen transmitters no longer
work once the new transmitter is programmed. Each
vehicle can have up to eight transmitters programmed
to it. See RELEARN REMOTE KEY under DIC
Operation and Displays on page 4‑60
.

Battery Replacement

Replace the battery if the REPLACE BATTERY IN
REMOTE KEY message displays in the DIC. See
“REPLACE BATTERY IN REMOTE KEY” under DIC
Warnings and Messages on page 4‑65
for additional
information.

Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static from
your body could damage the transmitter.

To replace the battery:

1. Separate the transmitter with a flat, thin object

inserted into the notch, located above the
metal base.

2. Remove the old battery. Do not use a metal object.

3. Insert the new battery, positive side facing up.

Replace with a CR2032 or equivalent battery.

4. Reassemble the transmitter.

3-6

Advertising