Cadillac 2011 DTS - Manual (Page 273)

Black plate (111,1) Cadillac DTS Owner Manual - 2011
Listing Stored Numbers
The list command will list all the stored numbers and
name tags.
Using the “List” Command
1. Press and hold
b g
for two seconds.
2. Say “Directory”.
3. Say “Hands Free Calling”.
4. Say “List”.
Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used
interchangeably to dial a phone number or a stored
name tag.
Digit Dial: This command allows a phone number to be
dialed by entering the digits one at a time.
Re‐dial: This command is used to dial the last number
used on the cell phone.
Using the “Dial” or “Call” Command
1. Press and hold
b g
for two seconds.
2. Say “Dial” or “Call”.
3. Say the entire number without pausing or say the
name tag.
Once connected, the person called will be heard
through the audio speakers.
Using the “Digit Dial” Command
The digit dial command allows a phone number to be
dialed by entering the digits one at a time. After each
digit is entered, the system repeats back the digit it
heard followed by a tone.
If an unwanted number is recognized by the system,
say “Clear” at any time to clear the last number.
To hear all of the numbers recognized by the system,
say “Verify” at any time.
1. Press and hold
b g
for two seconds.
2. Say “Digit Dial”.
3. Say each digit, one at a time, that you want to dial.
After each digit is entered, the system repeats
back the digit it heard followed by a tone. After the
last digit has been entered, say “Dial”.
Once connected, the person called will be heard
through the audio speakers.
4-111