Toa C-CC574 PL - Manual (Page 26)

26
Top cover
Tab
Tab
Camera direction
Top cover
15. Release the lock on the hinged portion of the base unit and connect the power, video, and signal cables to
the base unit.
(For details, please refer to p. 29; "Connections.")
Open
Hinged portion
Open
16. Lock the hinged portion of the base unit and secure the remaining two mounting holes.
Close
Hinged portion
17. Perform steps 4 – 11 on p. 10 – 12.
18. Mount the top cover by inserting the tabs of one half of the cover into the slots of the other half.
M4 x 8 screws supplied
with the combination camera