Toa C-CC574 PL - Manual (Page 27)

27
11. WALL MOUNTING
Use the optional C-BC511W Wall Mounting Bracket and optional C-BC511C or C-BC511C-S, Ceiling
Mounting Cover.
Note
Be sure to use the specified screws to mount the combination camera and wall mounting bracket, and ensure
that they are securely mounted without any play.
11.1. Mounting Example
Wall surface
Top cover
Saddle bracket and footing
C-BC511C or C-BC511C-S
Ceiling Mounting Cover (optional)
C-BC5111W
Wall Mounting Bracket
(optional)
Combination camera
Top cover
11.2. Mounting Procedures
1. Determine the mounting position, then make a mounting hole of ø50 – 60 mm on a wall.
2. Detach footings on the camera mounting side from the suspension pipe.
Removed footings and screws are attached to the base unit later. (refer to p. 24)
Footings and saddle bracket
on the camera mounting side
Suspension pipe