Toa C-CC574 PL - Manual (Page 28)

28
4. Perform steps 11 – 16 on p. 24 – 26.
5. Attach the top cover. Insert one top cover's clicks into the other top cover's slots.
Mount the top cover by inserting the tabs of one half of the cover into the slots of the other half.
Top cover
Tab
Tab
Top cover
Camera dir
ection
3. Mount the suspension pipe (with saddle bracket and footings) on a wall.
Mounting screw
Cable entry hole
on the wall surface
Wall surface
Mounting screw
Notes
• Since no mounting screws are supplied with the camera, prepare them separately.
• Use screws with a nominal diameter of 4 mm.
81
40
70
46
[Mounting hole dimensional diagram]
Unit: mm