Triner Scale RAVAS-310 - Manual (Page 20)

20
Not summing Operator error
. Load is not stable.
Scale needs to be unloaded before accepting new
print.
System will not print weights that are smaller than the
graduation.
HELP
messages HELP 2 Scale is overloaded Take load from scale. If there is no load do the same
checks as you do with HELP 3 and 7.
Help 3 or 7 Load cell signal too
high or too low. Check cables for damage. Move the cable while
looking at display to see if indicator reacts.
Measure load cells to see if they are fine.
Check the excitation signal of the indicator
Help 4 Out of zero range Zero calibration needed.