Triner Scale RAVAS-310 - Manual (Page 5)

5
THE BATTERY
The power supply to the system takes place through an exchangeable battery pack.
A completely charged battery should operate for a total weighing time of about 35
hours (on a system without a printer).
When the voltage level of the battery is running low, the display
will show “LO-BA”. When the battery is completely empty, the
weighing system shuts off.
It is necessary to charge the battery for at least 6 hours before the first use.
Recharge battery when the LO-BA indicator comes on.
If you use the system in shift work or if the system has a built-in printer, it is
recommended to purchase a supplementary battery pack.
The battery should be charged on the adapter supplied with the charger. When the
battery is charging, the LED on the charger is lit. When the LED turns off, the battery
is fully charged.
It is not possible to overload the battery because the charger shuts off automatically.