Twin Eagles TEBQ30R-B - Manual (Page 10)

PORTABLE LP CONNECTION –
T WIN E AGLES G AS G RILL
One of the many features of the
T WIN E AGLES grill base is the pullout slide pan for easy access to
the LP gas tank.
 NOTE: Use only a 20-lbs. (5 gallon capacity) gas
cylinder.
 WARNING: DO NOT PLACE MORE THAN ONE
CYLINDER IN THE BASE CABINET ENCLOSURE
AT ANY TIME.
 WARNING: DO NOT USE A DENTED OR RUSTED
LP CYLINDER.
 NEVER USE A CYLINDER WITH A DAMAGED
VALVE.
 ALWAYS CHECK FOR LEAKS AFTER
CHANGING THE LP CYLINDER.
 THE LP PRESSURE REGULATOR AND HOSE
SUPPLIED WITH THIS UNIT MUST BE USED
WITHOUT ALTERATION.
CAUTION: USE EASY PULL. Use the slot at the
front of the pan to push in or pull out the gas cylinder.
Do not place hand on the top of the gas cylinder when
pushing in or pulling out the slide pan.
1) To install the gas cylinder, pull out the slide pan and place the cylinder onto the pan.
2) Tighten the tank holding screw to secure the gas cylinder in place.
3) Check to ensure that the tank’s gas valve on top of the cylinder is closed.
4) Connect the LP regulator (included) to the cylinder and hand-tighten only. Open the
tank valve and make sure all connections are leak tight using a soapy water solution.
(Reference page 8 for leak test procedure).
Easy Pull
6
Tank Holding Screw