TYREDOG TD-4100A-X - Manual (Page 20)

V1.01-FJ04 (1105068)
20
Remove the original screw from Brake Fluid Reservoir and align
bracket, then install the screw back Please use proper force
tighten the screw.
Method B：This method may be locking with method A on a
variety of handle bar diameters.
Step 1. Make sure the handle bar diameter to be locking, and a
corresponding diameter of the anti slip holder mounting
plate placed in the handle bar.
Step 2. Install the bracket to the handler bar and properly tighten
the screw.