TYREDOG TD-4100A-X User Manual
Page 3
V1.01-FJ04 (1105068)
3
1. Due to rubber valve stem aging under high temperature and expose
under the sun, which may cause crack on the rubber stem, therefore,
we recommended metal type of valve stem.
2. Please make sure the LCD display can receive signals from two tire
pressure sensors.
3. Tyredog TPMS has unique anti-theft tool to prevent sensor being
stolen. You can decide whether install or not.
4. Please double confirm if sensors are fitted tightly. If necessary,
please spreading soap water on the valve stem to check any air
leakage.
5. If tire pressure is getting down or dropping quickly, please stop
motorcycle immediately to find out if tire is deflated or another other
problem.
6. It is normal that some tire pressure figures might not be updated
immediately due to there is no change of tire pressure in those tires
at all.
7. Tyredog TPMS has mechanism to avoid interfering /being interfered
with other signals.
8. Many environmental factors cause tire temperature rise and down
as well. For example, hot weather or warm tire will lead rising tire
pressure.
9. It is natural that tire pressure will decrease by days but not caused
by the installation of tire pressure monitoring system. Tyredog
TPMS can response with its real figure of pressure.
Precautions