TYREDOG TD-4100A-X - Manual (Page 38)

V1.01-FJ04 (1105068)
38
The following checklist will help you remedy problems you may
encounter with your unit. Before going through the checklist below,
check the connection and operating procedures.
1. Indications disappear from / do not appear in the display.
A. Please make sure if power switch is on.
B. Please make sure if monitor has battery inserted.
C. Be sure the power of battery is enough.
D. Be sure to observe the correct polarity when installing the
batteries.
E. If these solutions do not help improve the situation, consult your
nearest Tyredog dealer.
2. No connection between sensors and monitor.
A. Please make sure if sensor has battery (CR1632) inserted.
B. Be sure to observe the correct polarity when installing sensor
batteries.
C. Battery could run out of power and we suggest to replace with
new battery.
D. If these solutions do not help improve the situation, consult your
nearest Tyredog dealer.
3. Monitor display color is getting dark.
When monitor temperature is over 80 , it is natural that LCD panel
℃
will be getting dark. When monitor temperature is back to normal,
LCD panel will be normal again.
Troubleshooting