TYREDOG TD-4100A-X User Manual
Page 31
V1.01-FJ04 (1105068)
31
Take number 1 for example
Five
Seconds
Sensor learning mode
In a very unlike case, sensor could be broken or missed. Sensor
learning mode can provide an alternative way to replace sensors with
‘learnable sensors’. (‘Learnable sensor’ will need to purchase
separately.) LCD monitor can reload new identified number only from
‘learnable sensor.’ By obtaining new identified number from new
‘learnable sensor’, the system will integrate this sensor into its system
and replace old one.
Pressing “Backlight button” for around 5 seconds, the system will
enter ‘learning mode’, and system will start to recognize new sensors.
As long as enter this mode, insert battery into ‘learnable sensor’
immediately, the LCD monitor will beep once and finish learning
process.
The ‘learning mode’ will continue for about 30 seconds and then back
to main screen.