VACUUBRAND MV 10 NT - Manual (Page 30)

page 30 of 70
outlet tubing must be at least the size of the
pump’s exhaust connection.
• Reduce the transmission of vibration. Prevent mechan-
ical load due to rigid pipelines. Insert elastic hoses or
flexible elements as couplings between the pump and
rigid pipes.
Secure hose connections at the pump ap-
propriately, e.g., with hose clamps, to protect
against accidental detachment.
EX
✔
✘ Always install outlet tubing descending from
the pump to avoid backflow of condensate to-
wards the pump.
Plug in the power cord.
• Check the power source and the pump’s
rating plate to be sure that the power source
and the equipment match in voltage, phase,
and frequency.
Switch the pump on.
O ➨ I
NOTICE
NOTICE
Electrical connection