Wilson Audio Mezzo Convergent Synergy - Manual (Page 41)

Assembly
1. Remove the threaded inserts from the bottom of the Mezzo Convergent Syn-
ergy.
2. Insert threaded set screws into the bolt holes located on the bottom of your
Mezzo with the Allen head facing out.
3. Screw the acoustical diode onto the bolt until it fits snugly against the bot-
tom of the Mezzo Convergent Synergy. Do not overtighten.
4. Screw the spike (with nut) all the way in until it just touches the bolt. Do not
tighten the nut at this time.
5. Repeat steps 1 through 4 with the other spikes.
6. Using a spirit level placed on the top, flat surface of the Mezzo, make sure
it is level, both front-to-back and side-to-side. Make adjustments in the ap-
propriate spikes if the loudspeaker is not level.
M
easure
e
ar
H
eigHt
M
easure
L
istening
D
istance
f
igure
6 – M
easured
l
istening
d
istance and
e
ar
h
eight
s
e C T i O n
4 . 2 — M
e z z O
C
O n v e r g e n T
s
y n e r g y
s
p i k e s
41
W i l s o n A u d i o S p e c i a l t i e s
.