Wilson Audio Mezzo Convergent Synergy - Manual (Page 49)

Carefully lift the Mezzo Convergent Synergy and set the threaded setscrews into the
4 mounting holes located on the top of the mounted custom shelf.
3. Using the provided 3/8 – 16 nut, bolt the Mezzo Convergent Synergy to the
mounting bracket.
4. Turn to Section 4.7 for final assembly instructions.
Note: Be careful when loosening or tightening the screws that you do not damage the
painted finish.
Section 4.7—Connecting Speaker to Amplifier
Speaker Cables
The high current input terminals located on the rear of your Mezzo Convergent Syn-
ergy loudspeaker are color coded so that RED (marked “+”) corresponds to positive and
BLACK (marked “-”) to negative, common, or ground on the amplifier output. Be sure to
connect the loudspeakers in phase with each other. We recommend the use of the very
f
igure
13 – s
pade
l
ug
a
ttachMent
s
e C T i O n
4 . 7 — C
O n n e C T i n g
s
p e a k e r T O
a
M p l i f i e r
49
W i l s o n A u d i o S p e c i a l t i e s
.