Wilson Audio Mezzo Convergent Synergy User Manual
Page 59
sources that are unfocused and located at each speaker playing.
• With the Mezzo Convergent Synergy spiked, put on a multi-channel audio
track or movie scene with which you are familiar.
• Play the selection and listen for the integration with the main speakers. As
the audio moves across the three front speakers, listen for a smooth tran-
sition from one speaker to the next. You should not hear any voids in the
sound stage.
• Make 1/2” changes in front to back location until you find the Mezzo Con-
vergent Synergy location that offers the best integration.
Image Height
Check the image height. Does the dialogue of a movie have the correct height? Is it
too low or too high?
If needed, adjust the amount of rotation until the image height is correct. On a stand
or floor mounted Mezzo Convergent Synergy, raising the front spikes will raise the image
height; lowering the front spikes will lower the image height. Where possible, we recom-
mend that you add or remove a spacer
to get the correct image height. This
will allow the PDC to be reset using
the tables in Section 10.
Mezzo Convergent Synergy Rotation
Our testing has shown that a
stand-mounted Mezzo Convergent
Synergy, at listening distances greater
than 2-3 meters, requires the front of
f
igure
14 – s
pike
a
sseMblY
: d
iode
n
o
s
pacers
S
pike
n
ut
d
iode
3/4” S
et
S
creW
s
e C T i O n
5.3—i
n T e g r aT i n g
T h e
M
e z z O
C
O n v e r g e n T
s
y n e r g y
i n T O
s
u r r O u n d
s
y s T e M
59
W i l s o n A u d i o S p e c i a l t i e s
.