Ram Trucks 2015 ProMaster Commercial - User Guide - Manual (Page 29)

Cruise ON/OFF
• Rotate the center ring upward on the electronic speed control lever to turn the
system ON.
The cruise symbol will appear on the instrument cluster to indicate the Speed
Control is on.
• To turn the system OFF, rotate the center ring upward a second time.
Set
• With the Speed Control on, push the electronic speed control lever upward SET (+)
and release to set a desired speed.
Accel/Decel
To Increase Speed
When the Electronic Speed Control is set, you can increase speed by tapping the
Speed Control lever up (+).
The drivers preferred units can be selected through the radio settings if equipped.
Refer to ”Uconnect
® Settings” in “Understanding Your Instrument Panel” for more
information. The speed increment shown is dependant on the chosen speed unit of
U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Tapping the Speed Control lever up (+) once will result in a 1 mph increase in set
speed. Each subsequent tap of the lever results in an increase of 1 mph.
• If the lever is continually help up, the set speed will continue to increase until the
lever is released, then the new set speed will be established.
Metric Speed (km/h)
• Tapping the Speed Control lever up (+) once will result in a 1 km/h increase in set
speed. Each subsequent tap of the lever results in an increase of 1 km/h.
• If the lever is continually help up, the set speed will continue to increase until the
lever is released, then the new set speed will be established.
O P E R A T I N G Y O U R V E H I C L E
27