Ram Trucks 2015 ProMaster Commercial - User Guide - Manual (Page 43)

Start Pairing Procedure On Mobile Phone
• Enable Bluetooth
® and search for available devices on your Bluetooth ® enabled
mobile phone. This is usually within Settings or Options under “Bluetooth.” See
your mobile phone’s manual for details.
• When your phone finds the system, select “Uconnect” as the paired device. You
may be prompted by your phone to download the phonebook. This is so you can
make calls by saying the name of your contact (PBAP-Phone Book Access Profile).
Complete The Pairing Procedure
• When prompted on the phone, verify with radio password shown on the Uconnect
®
Screen.
• If your phone asks you to accept a connection request from Uconnect ® , select
“Yes.” If available, check the box telling it not to ask again – that way your phone
automatically connects each time you start the vehicle.
Select The Mobile Phone's Priority Level
• When the pairing process has successfully completed, the system prompts you to
choose whether or not this is your favorite phone. Selecting “Yes” makes this
phone the highest priority. This phone takes precedence over other paired phones
within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Push the Uconnect ® Phone button on
your steering wheel to begin.
Making A Phone Call
• Push the Uconnect ® Phone button .
• After the BEEP, say “dial” then the number (or “call” then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call — Accept (And End)
When an incoming call rings/is announced on Uconnect ® Phone:
• Push the Phone button .
• To end a call, push the Hang Up or Phone button.
Mute (Or Unmute) Microphone During Call
To mute the Uconnect ® Phone microphone during a call:
• Press the “Mute” button on the Phone main screen to mute and unmute the
microphone.
E L E C T R O N I C S
41