Wheel bolts – Ram Trucks 2015 ProMaster Commercial - User Guide User Manual
Page 83
Wheel Bolts
• All wheel bolts should be tightened occasionally to eliminate the possibility of the
bolts loosening unintentionally.
• This is especially important during the first few hundred miles/kilometers of
operation to allow the wheel bolts to become properly set.
• All wheel bolts should first be firmly seated against the wheel. The wheel bolts
should then be tightened to recommended torque. Tighten the wheel bolts to final
torque in increments.
• Progress around the bolt circle, tightening the wheel bolt opposite to the wheel
bolt just previously tightened until final torque is achieved. Recommended
torques are shown in the following chart.
Bolt
Size
Hex Size
Torque
Ft Lbs
Torque
Newton
Meters
M16 x 1.5
21 mm
145
197
W H A T T O D O I N E M E R G E N C I E S
81