Preparations – Ram Trucks 2015 ProMaster Commercial - User Guide User Manual
Page 80
Advertising
Preparations
1. Park the vehicle on a firm, level surface as far from the edge of the roadway as
possible. Avoid icy or slippery areas.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK.
5. Turn OFF the ignition.
6. Block the front and rear of the wheel
diagonally opposite of the jacking po-
sition. For example, if changing the
right front tire, block the left rear
wheel.
NOTE:
Passengers should not remain in the ve-
hicle when the vehicle is being jacked.
Wheels Blocked
W H A T T O D O I N E M E R G E N C I E S
78
Advertising