Campbell Hausfeld Serial I/O Interface SDM-SIO4 - Manual (Page 24)

SDM-SIO4 User Guide
3-8
z273 – This outputs the fixed string ‘CrLf (carriage return line feed)’.
*Table 1 Program
01: 2 Execution Interval (seconds)
;get battery voltage.
1: Batt Voltage (P10)
1: 2 Loc [ Batt_v ]
;get panel temperature.
2: Internal Temperature (P17)
1: 1 Loc [ Temp_C ]
;send battery voltage and temperature to port 2 on the SDM-SIO4.
3: SDM-SIO4 (P113)
1: 1 Reps
2: 0 Address
3: 2 Send/Receive Port 2
4: 2304 Command ;see Section 5 for explanation of
5: 9123 1st Parameters ;Command 2304 and its Parameters
6: 0 2nd Parameters ;
7: 2 Values per Rep
8: 1 Loc [ Temp_c ]
9: 1.0 Mult
10: 0.0 Offset
*Table 2 Program
02: 0.0000 Execution Interval (seconds)
*Table 3 Subroutines
End Program