Sears 831.159341 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

b. If tbe LCD display becomes dim, the 1.5-vo!f watch

batteries in the St^per Console (88) should be

reploced. Using a dsort phillips screwdriver,

remove the two screws attaching the bock of the

Stepper Console. Using the screwdriver, carefully

push the two batteries out of the battery clips; be

careful to note vdiich way the batteries are turned.

Insert

iwo

new 1.5-voIt watch botteries into the

bottery clips. Reattach the bock of the Stepper

Console.

4.

SYMPTOM: THE POWER DOES NOT TURN ON

o. Moke sure that the tronsformer is fully plugged info the jack on the CROSS TRAINER e, and into a 120-voIt outlet.

5.

SYMPTOM: THERE IS A CLICKING SOUND WHEN USING THE ARMS

o. Tighten the indicated 3/8' Nylock Nut (6) further

onto the 3/8'

X

3 1/2* Bolt (42) on eodi Arm

(15,16) until the Swvel Brockets (14) do nc4 slide

bock ond forth on the Bolts. Be careful not to over­

tighten the Nylock Nuts; the Swivel Brockets must

be able to swivel easily.

' 1994 Sears, Roebuck arxi Co.

26

Advertising