Sears 625.34842 - Manual (Page 18)

SECTION 4
OTHER THINGS TO KNOW
4A. DIMENSIONS/SPECIFICATIONS
FIG. 12
BYPASS VALVES
MODEL NO. 625.348420 TIMER SR CODE SRI7
NOTE:
Please see the rating decal for water softener operating capacity, salt usage and service flow rate/pressure loss
performance specifications. Performance specifications are validated by the Water Quality Association (WQA).
The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)------------------------ 3
MINIMUM-MAXIMUM WATER PRESSURE (psi)-------- 20-120
MAXIMUM WATER TEMPERATURE (°F)--------------------- 120
MAXIMUM WATER HARDNESS (gpg)-------------------------- 90*
MAXMUM “CLEAR WATER” IRON (ppm)------------------------- 3
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED------------------------------ Nugget/Pellet
ALTERNATE TYPE OF SALT -- Pure, evaporated, compacted
water softener salt
STORAGE CAPACITY (pounds)---------------------------------- 200
*Do not exceed this number when setting hardness in step 2,
page 7. The maximum setting available is 95.
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESIN (cu.ft.)-------------------------------------------.6
REGENERATION (RECHARGE) CYCLE TIME (min.)
fill ------------------------------------------------------------------2-8
BRINING/BRINE RINSE-------------------------------------103
BACKWASH--------------------------------------------------------7
FAST RINSE------------------------------------------------------- 3
TOTAL REGENERATION TIME-------------------- 115-121
gpm = gallons per minute
gpg = grains per gallon psi = pounds per square inch
ppm = parts per million
18